Stainless tube costs several times what carbon steel does, so weight matters more: it drives the material price, the freight, and sometimes whether a railing or frame design is practical. Stainless weight works exactly like carbon steel weight, just with a slightly higher density.
Density: 304 vs 316
Austenitic stainless steels such as 304 and 316 are about 0.289 lb per cubic inch, or about 8.0 g/cm³. Published values for the two grades differ by well under 1% (316 is very slightly denser because of its molybdenum and nickel), so for estimating, purchasing and freight you can treat 304, 304L, 316 and 316L as the same weight. Carbon steel is about 0.2836 lb/in³ (7.85 g/cm³), so stainless tube is roughly 2% heavier than the same size in carbon steel.
Formulas
Round tube
Weight (lb/ft) = 10.90 x (OD - wall) x wall
OD and wall are in inches. The constant is pi x 12 x 0.289. For carbon steel the same formula uses 10.69.
Weight (kg/m) = 0.02513 x (OD - wall) x wall
Here OD and wall are in millimetres, using 8.0 g/cm³.
Square and rectangular tube
Weight (lb/ft) = cross-section area (sq in) x 12 x 0.289
With sharp corners the area is (width x height) minus (width - 2 x wall) x (height - 2 x wall). Real tube has rounded corners, which removes a little steel, so the sharp-corner number reads a few percent heavy on thin small tube. The steel weight calculator accounts for corner radius; pick Stainless steel as the material.
Stainless tube weight chart
Calculated at 0.289 lb/in³ (8.0 g/cm³). Square sizes include an outside corner radius of twice the wall. Mill weights vary with the maker's corner radius and tolerances, so use these for estimating.
| Size | lb/ft | kg/m | 20' stick |
|---|---|---|---|
| 1" x 1" x 0.065" square | 0.81 | 1.20 | 16.1 lb |
| 1-1/2" x 1-1/2" x 0.065" square | 1.26 | 1.87 | 25.1 lb |
| 2" x 2" x 0.083" square | 2.15 | 3.19 | 42.9 lb |
| 2" x 2" x 0.120" square | 3.00 | 4.47 | 60.0 lb |
| 1" OD x 0.065" round | 0.66 | 0.99 | 13.2 lb |
| 1-1/2" OD x 0.065" round | 1.02 | 1.51 | 20.3 lb |
| 2" OD x 0.065" round | 1.37 | 2.04 | 27.4 lb |
For carbon steel versions of these shapes, see the square tube weight chart and the round tube weight chart.
Metric example: 32 x 32 x 2 mm 316 square tube
- Sharp-corner area: 32 x 32 - 28 x 28 = 1,024 - 784 = 240 mm².
- Corner correction with a 4 mm outside and 2 mm inside radius: (4 - pi) x (4² - 2²) = about 10.3 mm², leaving about 229.7 mm².
- Weight: 229.7 mm² x 8.0 g/cm³ / 1,000 = about 1.84 kg/m (about 1.92 kg/m if you ignore the corners).
- A 6 m length is about 11.0 kg, or about 24 lb.
The same steps work for any metric size. To convert, 1 lb/ft = 1.488 kg/m.
Round tube vs pipe
Stainless pipe is sized by NPS and schedule, and its actual OD is not the nominal size. Ordering "1-1/2 inch" stainless pipe gets you a 1.900" OD, not 1.5". Use the actual OD and wall in the formula, or check the steel pipe schedule chart for OD and wall by schedule. Stainless pipe also comes in light-wall schedules such as 5S and 10S that are less common in carbon steel.
Using the weight in a quote
Stainless is usually priced by the foot or by the stick rather than by the pound, but weight still matters for freight and for comparing suppliers who quote differently. Figure the sticks you need with the cut list optimizer (drop on stainless is expensive, so it pays to nest cuts carefully), total the material cost, and carry it into the quote builder with your markup and labor.
Grade choice (304 vs 316) is about corrosion, not weight: 316 is commonly chosen near salt water and chlorides. Follow the drawings and the customer's specification.
Frequently asked questions
Is 316 stainless heavier than 304?
Only very slightly. Both are about 0.289 lb per cubic inch (about 8.0 g/cm3), and published densities differ by well under 1%, so the same tube size weighs essentially the same in either grade.
How much heavier is stainless tube than carbon steel tube?
About 2%. Stainless is about 0.289 lb per cubic inch and carbon steel about 0.2836, so multiply a carbon steel weight by about 1.02 to estimate the same size in stainless.